Steel

  • 1008 Cold Rolled Steel Sheet

    A366/1008 Steel is genrally known as "commercial quality" cold rolled steel sheet, which displays good formability, very good smooth surface finish that is far superior to hot rolled steel. "Cold Rolled" refers to the process of the removal of the...

    $13.01
  • 1018 Cold Finished Steel Round Rod

    1018 is a low carbon steel with a medium manganese content, also known as "mild steel". C1018 has good case hardening properties and excellent machinability. Suitable for shafting and for other applications that do not require the greater strength of...

    $1.00
  • 1018 Cold Finished Steel Square Bar

    C1018 is a low carbon steel with a medium manganese content, also known as "mild steel". C1018 has good case hardening properties and excellent machinability. Suitable for shafting and for other applications that do not require the greater strength of...

    $1.00
  • 1018 Low Carbon Precision Ground Steel Flat Bar

    Precision Flat Ground 1018 Low carbon Steel is a finegrained, vacuum-degassed carbon steel. It is easily machined, has excellent weldability.Tolerances are:Thickness: +/- 0.001"Width: + 0.000/0.005"Length: + 0.250/0.500"Squareness: 0.003" per inch

    $1.00
  • 1144 Steel Round Rod

    1144 Steel is a higher-strength alloy than 1018 or A36, but in addition has improved ductility as well. 1144 steel is easy to mahine and has a very low distortion or warpage after machining.

    $1.00
  • 12l14 Steel Round Rod

    12L14 Steel is commonly referred to as "Ledloy" and is a standard free cutting carbon steel.This alloy has lead, sulphur and phosphurus added for fast machining rates and smooth, bright finishes.

    $1.00
  • 4130 Alloy Steel Round Rod

    4130 steel, also known as "chromoly" is a chrome alloy steel with medium carbon content containing approximately 1% chromium as the strengthening agent. 4130 is easily machined and has excellent weldability and offers excellent ductility.

    $1.00
  • 4140 Alloy Steel DCF Flat, Thickness: 0.500 (1/2 inch)

    4140 Alloy Decarb-Free (DCF) Steel is a chromium, moly alloy that is used for as wide variety of applications where greater toughness and wear resistance is needed over lower carbon grades. Flats are generally cut from larger plates and are oversize from...

    $1.00
  • 4140 Alloy Steel HFS Round Tube

    4140 HFS Round Tube is a hot finished seamless (HFS) tube that is a lower-cost alternative to cold drawn seamless (CDS) tube. Produced in large, heavy wall sizes where application requires machining to specific sizes.

    $1.00
  • 4140 Alloy Steel Round Rod

    4140 is a widely used medium carbon steel containing chromium and molybdenum, it commonly known as "chromoly". A general purpose alloy, offering the right combination of strength, toughness and hardness with good machinability. 4140 can be quenched and...

    $1.00
  • 4340 Alloy Steel Hot Rolled Round Bar

    4340 Alloy Steel Hot Rolled Round Rod

    4340 is a highly alloyed steel with high nickel and chromium content which assures deep hardening when oil quenched, with high strength characteristics throughout the section. Used for heavily stressed parts operating under strenuous conditions. Hot...

    $1.00
  • 4340 Alloy Steel Round Rod

    4340 is a highly alloyed steel with high nickel and chromium content which assures deep hardening when oil quenched, with high strength characteristics throughout the section. Used for heavily stressed parts operating under strenuous conditions.

    $1.00
  • 8620 Alloy Steel Hot Rolled Round Rod

    8620 Alloy is a low carbon, nickel, chromium, and molybdenum alloy. The nickel content contributes to case toughness and core toughness, while the chromium and molybdenum give good it surface hardness and wear. Hot Rolled Steel Rounds have a rougher...

    $1.00
  • 8620 Alloy Steel Round Rod

    8620 Alloy is a low carbon, nickel, chromium, and molybdenum alloy. The nickel content contributes to case toughness and core toughness, while the chromium and molybdenum give good it surface hardness and wear.

    $1.00
  • A36 Hot Rolled Steel Round Rod

    Hot Rolled Mild Steel Round Bar is made of low carbon steel similar to C1018. Unlike cold rolled steel, Hot Rolled Steel has a rougher surface and with galvanization, it can resist corrosion well. A36 offers good weldability, machinability, and can be...

    $1.00
  • A60 Galvannealed Steel Sheet

    Galvannealed sheet is carbon steel sheet coated with zinc on both sides using a continuous hot dip process. The zinc coating is harder than a regular galvanized coating and is more resistant to scratching and manufacturing damage. However, the harder...

    $1.00
  • C300 Maraging Steel Round Rod

    C300 Maraging Steel alloy is a vacuum induction melted plus vacuum arc re-melted, low-carbon, nickel-cobalt-molybdenum high temperature alloy capable of attaining yield strengths in excess of 270 ksi through simple, low temperature heat treatment at 900F...

    $1.00
  • E.R.W. Steel Round Tube

    E.R.W. (Electrical Resistance Welded) tube is produced from low carbon steel. This steel tube is used for general purpose applications. The Outside Diameter is smooth and clean with the flash removed. Meets ASTM A513 Type 2.

    $1.00
  • G90 Galvanized Steel Sheet

    G90 Galvanized Steel sheet is a carbon steel sheet coated with zinc on both sides and are intended for usewhere greater corrosion protection is required without painting. Galvanized Steel Sheets are easy to weld, form, and drill.Finish is a "spackled"...

    $1.00
  • Galvanized Steel Expanded Sheet (Flattened)

    Galvanized Steel Expanded metal sheets are created by slitting and cold-forming mild steel sheet as it expands in a press. This creates diamond-shaped openings that are nominally measured the long way of the diamond (LWD) and the short way of the diamond...

    $1.00
  • Galvanized Steel Perforated Sheet

    Perforated Metal has endless applications such as enclosures, partitions, sign panels, guards, screens, and more. Perforated galvanized Sheets are steel with a durable protective coating of zinc. They may be formed without flaking or peeling. They can...

    $1.00
  • Steel DOM Mechanical Round Tube, (0.500 to 1.000 OD)

    Round Steel Mechanical Tube, is a welded mechanical round steel tube with the internal welded seam removed creating a smooth internal surface. Tubes with wall thickness of 1/2 or less are DOM (drawn over a mandrel) to produce a tube having more exact...

    $1.00
  • Steel DOM Mechanical Round Tube, (1.063 to 2.000 OD)

    Round Steel Mechanical Tube, is a welded mechanical round steel tube with the internal welded seam removed creating a smooth internal surface. Tubes with wall thickness of 1/2 or less are DOM (drawn over a mandrel) to produce a tube having more exact...

    $1.00
  • Steel DOM Mechanical Round Tube, (2.125 to 3.000 OD)

    Round Steel Mechanical Tube, is a welded mechanical round steel tube with the internal welded seam removed creating a smooth internal surface. Tubes with wall thickness of 1/2 or less are DOM (drawn over a mandrel) to produce a tube having more exact...

    $1.00
  • Steel DOM Mechanical Round Tube, (3.250 to 4.000 OD)

    Round Steel Mechanical Tube, is a welded mechanical round steel tube with the internal welded seam removed creating a smooth internal surface. Tubes with wall thickness of 1/2 or less are DOM (drawn over a mandrel) to produce a tube having more exact...

    $1.00
  • Steel DOM Mechanical Round Tube, (4.250 and Larger OD)

    Round Steel Mechanical Tube, is a welded mechanical round steel tube with the internal welded seam removed creating a smooth internal surface. Tubes with wall thickness of 1/2 or less are DOM (drawn over a mandrel) to produce a tube having more exact...

    $1.00
  • Steel Expanded Sheet (Flattened)

    Cold Rolled Steel Expanded and Flattened Sheet, Flattened Expanded Metal diamond-shaped openings are flatter and smoother than the Standard Expanded Metal patterns, having been run through a flattening process. This process elongates the short way of the...

    $1.00
  • Steel Perforated Sheet

    Perforated Metal has endless applications such as enclosures, partitions, sign panels, guards, screens, and more. Sheets have an oiled, smooth, cold rolled finish. Can be formed, welded, painted. Sheets are magnetic.

    $1.00