6063 Anodized Aluminum Architectural Angle

6063 Architectural Aluminum Angle has square corners on both inside and outside of the angle. 6063 alloy is a moderate strength alloy that provides excellent corrosion resistance and forms easily. The clear anodized finish adds a layer of protection to...

6063-T52 Aluminum Pipe

6063 alloy is a moderate strength alloy that provides excellent corrosion resistance, formability and welds easily, it also can be polished to a high luster. Note: Pipe sizes can be confusing, while "Tube" is listed as the actual size of the tube, "Pipe"...

6063-T52 Aluminum Rectangle Tube

6063-T52 Aluminum Rectangle Tube is a medium strength alloy that has square defined corners on both inside and outside radiuses and has better corrosion resistance and finishing qualities than alloy 6061.

6063-T52 Aluminum Round Tube (Anodized)

Clear Anodized Finish gives the tube a slick, weather resistant finish. 6063 alloy is a moderate strength alloy that provides excellent corrosion resistance, form-ability and welds easily. Tubes with less than 1/8 inch wall are seamless drawn. | Tubes...

6063-T52 Aluminum Round Tube (Thin Wall)

6063 alloy aluminum round tubing is excellent for outdoor and architectural uses due to its superior corrosion resistance. It is more form-able and softer than the 6061 alloy.

6063-T52 Aluminum Square Tube

6063-T52 Aluminum Square Tube has square defined corners on both inside and outside radiuses. The 6063 alloy is a medium strength alloy that has excellent corrosion resistance and finishing qualities. It is easily welded and formed. The T52 temper adds...

7050-T7451 Aluminum Plate, Thickness: 1.000 (1 inch)

Aluminium Alloy 7050 is an aerospace grade of aluminium which combines high strength, stress corrosion cracking resistance and toughness.

7050-T7451 Aluminum Plate, Thickness: 1.500 (1-1/2 inch)

Aluminium Alloy 7050 is an aerospace grade of aluminium which combines high strength, stress corrosion cracking resistance and toughness.

7050-T7451 Aluminum Plate, Thickness: 2.000 (2 inch)

Aluminium Alloy 7050 is an aerospace grade of aluminium which combines high strength, stress corrosion cracking resistance and toughness.

7075 Aluminum Square Bar

7075 Aluminum alloy is one of the strongest of all the aluminum alloys. It's uses parallels that of 2024, but is selected when higher mechanical properties are required. Forming is limited.

7075-O Alclad Aluminum Sheet

Aluminum Sheet 7075 O Clad, also known as Alclad Aircraft Aluminum, has a high zirconium and titanium composition making it an excellent choice for its strength-to-weight ratio. The O or "annealed" temper is in the most formable condition and allows for...

7075-T651 Aluminum Flat Bar, Thickness: 0.500 (1/2 inch)

7075 is one of the highest strength aluminum alloys available. Its strength-to-weight ratio is excellent, and it is ideally used for highly stressed parts. Forming and welding are limited.

7075-T651 Aluminum Flat Bar, Thickness: 2.500 (2-1/2 inch)

7075 is one of the highest strength aluminum alloys available. Its strength-to-weight ratio is excellent, and it is ideally used for highly stressed parts. Forming and welding are limited.

7075-T651 Aluminum Round Rod

7075 Aluminum alloy provides the greatest strength available in aluminum bar stock. Widely used in aircraft and where lightweight yet high strength is required.

7075-T7351 Aluminum Round Rod

7075 Aluminum alloy provides the greatest strength available in aluminum bar stock. Cwidely used in aircraft and where lightweight yet high strength is required.

Aluminum Composite Sheet (Brushed Aluminum/White)

Aluminum Composite Panel with Silver Brushed Finish on one side and Ultra White Matte Finish on the other side.Aluminum Composite sheets are composed of two aluminum sheets or "skins" with a core of polyethylene, bonded or "sandwiched" in between the two...

Aluminum Expanded Sheet (Flattened)

Expanded metal sheets are created by slitting and cold-forming metal as it expands in a press. This creates diamond-shaped openings that are nominally measured the long way of the diamond (LWD) and the short way of the diamond (SWD) and long way of the...

Brushed Anodized Aluminum Sheet

5005 aluminum alloy is a medium strength alloy, with both good weldability, and good corrosion resistance in marine atmospheres.The clear anodized finish adds a layer of protection to the surface of the sheet giving it a uniform appearance with a...

Chevron Blue / Blue Painted Aluminum Sheet

Chevron Blue on both sides Painted aluminum sheet has acrylic paint on both sides and also has a protective PVC peel-off coating on front side to protect the finish during handling and shearing operations. Excellent for cosmetic applications, race cars,...

Clear Anodized Aluminum Sheet

5005 aluminum alloy is a medium strength alloy, with both good weldability, and good corrosion resistance in marine atmospheres.The clear anodized finish adds a layer of protection to the surface of the sheet giving it a uniform appearance with a smooth,...

White / Mill Painted Aluminum Sheet

Sheets have Polar White acrylic paint on one side, Bare Aluminum Mill Finish on other side.Painted aluminum sheet has white acrylic paint on one side and also has a protective PVC peel-off coating on one side to protect the finish during handling and...

White / White Painted Aluminum Sheet

Painted aluminum sheet has acrylic paint on both sides and also has a protective PVC peel-off coating on one side to protect the finish during handling and shearing operations. Excellent for cosmetic applications, race cars, signs, etc.